Vehicle Highlights

• Non Conforming VIN / Incorrect Fasteners
• Complete Restoration with SSII Package
• Previous Owner has 45 Years of Experience, Including Restorations
• In 2023, the Previous Owner Acquired a Kentrol Fiberglass Body and Another Scout to Begin this Particular Project
• Over the Past Year and a Half, the Previous Owner Rebuilt, Restored, or Replaced Every Component - Starting from a Sandblasted and Painted Bare Frame and Axles
• Sourced IH SV-345 CID Engine: Boring 0.030 Over, Machining Bearings for the Mains and Cam, and Machining and Polishing the Heads and Crankshaft
• Engine Assembly Completed in Late 2023
• Engine is Equipped with an HFI (Hamilton Fuel Injection) GM-Style Throttle Body with a GM Computer that Also Controls Timing
• TF727 Automatic Transmission was Rebuilt by a Local Shop
• Dana 20 Transfer Case was Rebuilt with New Bearings and Seals
• Both Dana 44 Axles Received New Seals and a Complete Brake Overhaul (Disc Front, Drum Rear)
• New 31/10.5.15 All-Terrain Tires were Installed on Black Powder-Coated Scout II Wagon Wheels
• Steel Structural Supports were Replaced, and All Original Floor Supports were Removed and Replaced with Marine Plywood in Rear Floor Section and 1.25" Coosa Board (Used for Boat Transoms) for the Main Floor Supports
• Firewall was Filled and Smoothed
• Bottom of the Tub was Sprayed with Bedliner Material
• Body Parts were Painted with a Blue CAS525 Color Code (Base Coat, Clear Coat), then Wet Sanded and Buffed
• SSII Style Graphics were Applied after Buffing
• New Bestop Bikini Top and Hardware were Installed - Extending from the Windshield to the Factory-Style Black Powder-Coated Rollbar
• Factory SSII Grille and Door Inserts - with Metal Half-Door Frames - Were also Installed
• Interior Floor was Covered in Sea-Dek Style Marine Foam
• Factory Bucket Seats and the Rear Fold-and-Tumble Bench Seat were Re-Covered in Weather-Resistant Tan Vinyl with Blue Piping
• Factory Center Console was Restored and a New Lid was Fabricated and Wrapped with Matching Vinyl - Featuring an Embroidered IH Logo
• Factory Dash Pad was Restored and Covered in Matching Vinyl
• Factory Gauges Restored
• Waterproof Marine Dual Bluetooth stereo was Installed in Place of the Factory Radio - with Speakers Integrated into the Vent Covers in the Kick Panels
• All New Wiring was Installed using an American AutoWire Harness
• New Battery Wiring to the Starter and Ground Wiring to the Engine Block were Installed - Along with a New Marine Battery